Consider an ASTM A992 W 18×50 beam forspan and uniform dead and live loads as shown in Figure 1. Maximální jmenovitá výška prutu je 18 palců. The live load deflection is limited to L/360. The beam is simply supported and continuously braced. Verify the available flexural strength of the selected beam, based on LRFD and ASD.
Tyč se čtvercovým průřezem je na svém horním konci vetknutá. The rod is loaded by self-weight. For comparison, the example is also modeled with the concentrated force load, the value of which is equal to the gravity. The aim of this verification example is to show the difference between these types of loading, although the total loading force is equal.
Tento příklad slouží jako ukázka vazby diafragma. The application is shown on a two-story structure. The structure is loaded by means of lateral forces according to Figure 1. Determine the maximum deflection of the structure ux in the direction of the loading forces using both the diaphragm constraint and the plate model of the floor.
Konzola z obdélníkového průřezu leží na pružném Pasternakově podloží a je zatížena rovnoměrným zatížením. The image shows the calculation of the maximum deflection and maximum bending moment.
Konzola obdélníkového průřezu leží na pružném Winklerově podloží a je zatížena rovnoměrným zatížením. The image shows the calculation of the maximum deflection and maximum bending moment.
Ocelový nosník se čtvercovým průřezem je zatížen normálovou silou a spojitým zatížením. The image shows the calculation of the maximum bending deflection and critical load factor according to the second-order analysis.